- Your cart is empty
- Continue Shopping
Benecheck Uric Acid Strips (25 Test)
₹1,188.00
Overview
Buy Multi Monitoring Benecheck strips (Pack of 25 strips) (Uric Acid Monitoring Strips) which are used for measuring uric acid level in capillary whole blood. These Accurex Uric acid test strips are individually sealed in air-tight foil packets to protect against light & moisture for maximum storage life.
Each box of 25 individual strips comes with its own code chip, which fits in the Benecheck meter. This code chip is calibrated to each box of strips, ensuring maximum testing accuracy.
33 in stock
About
Measuring uric acid level in capillary whole blood from fingertip.
The meter can be used by laypersons or healthcare professionals.
In vitro diagnastic use only.
Principle:
Electrochemical biosensor technology.
Chemical Composition of Strip
Wetting agent: cellulose
Other ingredients (buffer, surfactant, etc.): ≥ 0.01 mq
Storage and Handling
Storage the strips within 4-30° C (39-86° F), use within 3 months after first open.
Handle the strips with dry and clean hand.
Recap strip vial immediately after use if applicable.
Use the strip immediately after taking out from the vial or the foil pack.
Do not use expired strips. It may cause false result.
Do not expose the strips under sunlight, heat or humid environment.
Do not repack, change vial or the foil pack, refrigerate or freeze the strips.
Do not bend, cut or fold the strips.
Specification
Auto Strip Recognition:
Please refer to User’s Manual for more information
IMPORTANT: Please double check the test mode before testing
Perform the test at room temperature 10-40C (50-104F), or it may cause inaccurate results or damage test strip.”
Safety Information
● Please follow local regulations to discard used test strips and lancets.
● Used test strips, lancets and any other material that has been in contact
with blood should be treated as potential biohazards.
● If user has infectious disease, the used test materials could be sources of infection.
● Lancets cannot be reused.
● Always use certified lancets to ensure safety”
Direction for Use
1. Installing/ Replacing the Batteries
This meter uses a CR2032 battery. Please remove the plastic tab under the battery before using.
2. Set the Date and Time
Press Back Setting Button (3 secs) → One “Beep” Sound → Setting Mode → Turn
Off Automatically after Setting.
3. Code the Meter
• Code your meter when you first use it or open a new vial of strips.
• Make sure the meter is off before you insert the code strip.
• Make sure the codes on screen, code strip, and strip vial label are the same.
4.Materials you need to perform a test:
BeneCheck Meter/ BeneCheck Test Strip/ Lancing Device/ Lancets/ Tissue or Cotton Ball with
75% Ethanol or Disinfection Wipes
5. Perform the Test
• Wash and clean your hands with disinfection wipes, and make sure your hands are dry
before testing.”
Other Info
• Please finish the test within 5 minutes or the meter will turn off automatically.
• The meter will not turn on if you insert the wrong end or wrong side of strip.
• Marked open date on new open strip vial, do not use expired strip.
• Dropping, bumping or other violent impact will damage the meter or cause malfunction.
• Do not use the meter in an environment with possible magnetic, electromagnetic, and radioactive interferences.
1 review for Benecheck Uric Acid Strips (25 Test)
Related products
Ujwal Ghosh –
Strips are of good quality at this price